Skip to main content

2AZ READY MIX

The Right Mix.
Delivered to Your Pour.

Volumetric delivery. No waste. No short loads. 6 days a week across the GTA.

WHY VOLUMETRIC

Fresh concrete.
Mixed at the pour.

A volumetric truck carries dry aggregates, cement, and water in separate compartments. They combine on-site — at the mouth of the truck, directly into your pour. That means you get factory-fresh concrete regardless of traffic, delays, or how long setup takes.

Drum trucks pre-mix at the plant. Once the drum starts turning, you're on a 90-minute clock before the load kicks off. If you're not ready — you pay for a return trip or lose the load. With volumetric, the clock doesn't start until you're ready to pour.

You also pay for exactly what you use. Order 3.5 m³, use 3.2 m³ — you're billed for 3.2. No minimum-load waste, no overage charges.

Factor Batch Plant 2AZ Volumetric
Minimum order Full truck (~7 m³) 1 m³
Waste High — pay for full load None
On-site adjustments Impossible Yes — on the spot
Clock pressure 90-minute limit Mixed on arrival

MIX SPECS

Available Mix Designs

All mixes meet Ontario Building Code and CSA A23.1. Air-entrained for exterior applications. Custom aggregate sizing and admixtures available — ask when you call.

Standard

25 MPa

Sidewalks, driveways, residential slabs, non-structural footings

Min order: 1 m³

High Strength

30 MPa

Garage floors, commercial slabs, structural footings, retaining walls

Min order: 1 m³

High Strength

35 MPa

Heavy commercial slabs, suspended slabs, columns, structural beams

Min order: 1 m³

High Strength

40 MPa

High-load industrial floors, precast elements, demanding structural work

Min order: 1 m³

Fiber Reinforced

30 MPa + fibres

Crack-resistant slabs, pool decks, warehouse floors, overlays

Min order: 1 m³

Exposed Aggregate

30 MPa

Decorative driveways, patios, walkways, pool decks

Min order: 1 m³

Colored Concrete

25–30 MPa

Decorative driveways, patios, stamped work, feature areas

Min order: 1 m³

Flowable Fill (CLSM)

Low strength (0.3–1 MPa)

Trench backfill, utility abandonment, void filling, pipe bedding

Min order: 2 m³

* Pricing varies by mix design, volume, delivery distance, and project requirements. Contact us for an accurate quote.

READY TO ORDER

Call us. We'll quote you same-day.

Have your pour address, approximate m³ needed, mix type, and date. We'll handle the rest.

Call us directly

647-926-2597

Have ready when you call

  • 1
    Pour address — City + access notes (alley, pump required, tight access)
  • 2
    Volume needed — Approximate m³ — we can help calculate from dimensions
  • 3
    Mix spec — 25 MPa, 30 MPa, fibre? Use the table above as reference
  • 4
    Pour date — Book 24h out when possible. Rush available.

Or submit a quote request and we'll call you back

Online quote form not yet configured.

Call 647-926-2597 or email [email protected] to request a quote.

FAQ

Frequently Asked Questions

What is volumetric ready mix concrete?
Volumetric mixers carry dry aggregates, cement, and water separately and combine them on-site at the point of pour. Unlike drum trucks that pre-mix at the plant, volumetric mixing means you get fresh concrete mixed to your exact spec, in the exact quantity you need — no waste, no 90-minute clock pressure.
What is the minimum order for ready mix delivery?
Our minimum order is 1 m³ for most mixes, and 2 m³ for CLSM flowable fill. Volumetric delivery is ideal for small pours — you only pay for what you use.
How far in advance do I need to book?
We recommend booking at least 24 hours in advance for a confirmed time slot. Rush and same-day delivery may be available depending on scheduling — call us and we'll do our best.
What mix strengths do you offer?
We offer mixes from 25 MPa standard through 40 MPa high-strength, plus fibre-reinforced, exposed aggregate, colour, and flowable fill (CLSM). All mixes meet CSA A23.1. Custom admixtures available on request.
Do you deliver to my city?
We deliver across the GTA including Toronto, Mississauga, Brampton, Oakville, Burlington, Vaughan, Markham, Etobicoke, Scarborough, and surrounding areas. Call to confirm your site.
Can you help me calculate how much concrete I need?
Yes. Call us with your dimensions — length, width, and depth — and we'll calculate the volume. We'll make sure you order the right amount and recommend the right mix for your application.
Call Us